![]() ![]() After a short moment, you will see a blue status icon indicating a successful connection.Password: The default password is “admin”, click the dialogue box and use the on-screen keyboard to enter.User Name: Leave the default “admin” user name.Transfer Protocol: Leave the default “Auto” setting. ![]() Management Port: Port “80” will be selected automatically.IP Camera Address: Click the dialogue box and use the on-screen keyboard to enter the camera’s IP address.Adding Method: Change this to “Manual”.Click the checkbox to select the channel that you would like to add the camera to (in the example shown, channel D1 has been selected) then click the “Edit” button located next to the camera’s IP address.Write down the camera’s IP address as you will need this to add the camera. This indicates that your NVR is detecting the camera connected to your router. Right-click the mouse, click “Menu” then click “Camera”.To configure the camera, please do the following on your NVR: You can purchase this from most computer and office supply stores (an additional Ethernet cable may also be required). A separate PoE injector (or PoE switch) is also required to power the camera. The camera must be connected to your router for successful connection. Direct connection to your NVR is NOT SUPPORTED. Check your recorder before purchasing new cameras. Please note: Not all recorders support ONVIF. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |